Untitled 2
50cc Differential Gear Equipped Trike Gas Motor Scooters - 2010 Model
Year
Volume Discount:
QTY |
Price/Unit |
You Save |
2 |
$1,509.00 |
$980.00 |
3 |
$1,489.00 |
$1,530.00 |
4 |
$1,479.00 |
$2,080.00 |
5+ |
|
Product Description
There are not that many three wheel gas scooters available, but what is
available can be great options for anybody who wants a safer and more stable
scooter than what they can get from a regular two wheel gas scooter. These
are great vehicles for those first-time-riders or for anyone who is struggling
with balancing. It's also perfect for those who have height issues not being
able to touch the ground & those not wanting to deal with the hassle of changing
gears.
This scooter effectively handled them all thanks to the 4 stroke 50cc GY6
single cylinder motor, which puts out predictable power and reaches a top speed
of 30 mph with incredible gas mileage. The effortless electric starter with a
push-button makes it easy to get rolling. Most importantly, you won’t need to go
through the hassle to get a motorcycle license because it can be driven without
a special license in all states.
Braking is provided by an ABS Hydraulic front disc mounted near the wide 10
inch front wheel. The fan assisted air cooling system keeps engine temperatures
reliably under control, even while idling at stoplights--for maximum efficiency
and longer engine life.
It also comes with a built in tow hitch will allow you carry a small cargo
weights less than 50lbs. The under-seat storage swallowed up a helmet, a laptop,
and any other small personal belongings, with a little room to spare! If that's
not enough there's also a locking storage compartment provided at no additional
charge with the purchase of the scooter.
They get good gas mileage, which makes them more affordable than a car. All
of those considerations make them more practical in a busy urban environment.
You are probably wondering how we can afford to sell these scooters at such
low prices. We don’t pick products from different factories; we design, select
the best quality parts, and build our own scooters! Factory direct!
We ship directly from our 96,000 sq. ft. warehouse here in Chino California. We
are here 7 days a week to assist you with your every need.
Product Highlights:
- High performance drive belt & Japanese designed carburetor
- Matching rear storage trunk with lock (normally a $45 upgrade, now
free!)
- Aluminum Rims
- Comfortable padded Seat
- Differential gear installed in the rear axle
- EPA approved and street legal in all states except for CA, NJ
Remember every purchase from Scooter Depot includes:
- Free Residential Service fee with lift gate service.
- Your unit started and tested by our mechanics before it is sent to you!
- Free MSO and Bill of Sale
- Life Time technical support
- 1 year Engine warranty
- Full parts availability
- Factory Direct Pricing
- 100% Freight protection insurance
Technical Support:
We are a DMV certified full line
dealership, our experienced technicians provide professional service that you
can count on, phone number to technical support is 888-839-7088 or 909-287-0366
Monday thru Friday, 9am to 5pm PST. Please provide order information when you
call.
Some Assembly Required.
In most cases and depending
on which model purchased, it usually takes anywhere from 30 to 90 minutes to
complete the assembly process of your vehicle. Our vehicles are usually 80%
assembled at the factory and fully tested prior to shipping.To complete the
assembly of your vehicle, you will need to properly install and/or assemble the
contents included with your vehicle. Depending on the model purchased, these
items are usually located in the storage compartment underneath the seat. For
your safety, be sure to check and tighten all screws, nuts, and bolts prior to
using your vehicle for the very first time and periodically thereafter.
Depending on the length of time the scooter has been stored in the crate after
factory testing, the carburetor may need to be cleaned due to possible sediment
build-up. Detailed instructions on how to perform this procedure can be obtained
by contacting our technical support team. Local pick-ups and optional assembly
service is available upon request.
Remember!
You are responsible for performing the
setup and PDI (Pre-Delivery Inspection) that a dealer would normally perform
(ie. installing rear view mirrors, setting up and connecting the battery,
checking tightness of all screws, nuts, bolts, changing oil, etc.). In some
instances, it may be necessary for your vehicle to be setup and tuned by a local
service center. Items such as loose hardware and parts damaged from loose
hardware and components are not covered under warranty. It is advisable to use a
thread locking agent such as Loctite on all hardware to help prevent loss of
hardware. Occasionally, on some units, it may be necessary to perform other
routine checks or adjustments, such as adjusting the setting of the idle speed
and fuel/air mixture screws on the carburetor, cleaning of the carburetor,
checking to ensure wires are connected properly, adjusting chain slack and
alignment (if applicable), in order to achieve optimum performance from your
vehicle. We will gladly assist you with any additional technical questions you
may have.
Prior to first use, it is mandatory to have the existing motor/engine oil
(known as “packing oil”) replaced. The packing oil should be replaced
with conventional four-stroke “Motorcycle Grade” (SAE 10W-40) engine/motor oil.
Be sure to regularly inspect engine fluid levels to ensure that your vehicle
operates safely according to manufacturer’s recommended specifications.
Specifications
Engine Type |
49.5cc, 4-Stroke |
Cooling System |
Air-Cooled |
Max Horsepower |
2.82hp |
Transmission/Clutch |
CVT Automatic |
Number of Gears |
N/A |
Final Drive |
Chain |
Starting System |
Electric |
Ignition |
CDI |
Max Speed |
41.6 MPH (Depending on Riders Weight and Road Conditions) |
Max Torque |
3.1/6500N.m./rpm |
Battery |
12V/7Ah |
Fuel Capacity |
1.2 gal |
Frame |
Reinforced Steel Tube |
Front Suspension |
Dual Telescopic Forks |
Rear Suspension |
Dual Shock |
Front Brake |
Hydraulic ABS Disc Brake |
Rear Brake |
Hydraulic Disc Brake |
Front Tire |
3.00-10 |
Rear Tire |
225/40-10 |
Lighting |
Headlights, Front & Rear Turning Signals, Tail Lights, Brake Lights |
Weight Capacity |
441 lbs |
Number of Riders |
1 |
Dry Weight |
286 lbs |
Seat Height |
29.4 inches |
Overall Length |
74.8 inches |
Warranty |
Engine 1 year; frame 1 year |
Carton Size |
72.8" X 34.2" X 43.3" |
Assembly |
Battery, rear wheels, rear fenders, hitch, trunk, windshield and the
rear mirror mirrors and minor adjustments set up may be required. |
Note: Scooter performance may vary depending upon
weather conditions, terrain conditions, length of use and wieght of rider.