Multi-Terrain Versatility, Velineon Brushless Power, 4WD
Performance!
The new Traxxas 1/10 Rally delivers rally-racing excitement with its
purpose-built design and innovative features. The all-new, performance-optimized
low-CG chassis combines with the proven Velineon brushless power system and
full-time 4WD to unleash a new kind of R/C fun. The Rally delivers true
multi-terrain versatility. Tackle off-road terrain with long-travel suspension,
then transition to pavement with precise handling for thrilling full-power
drifts. From the rush of closed-circuit rally-cross to wide-open European rally
racing, the Traxxas Rally replicates the full-throttle excitement of the
full-size machines and their dynamic racing style. And since rally races don't
slow down for rain or snow, neither does the Traxxas Rally. Waterproof
electronics allow rain-or-shine racing for even more realism and fun, with speed
to match--40+mph with the included Power Cell NiMH battery, over 60+mph with an
optional 3-cell Power
Cell LiPo pack! The 1/10 Rally is
Ready-To-Race and Traxxas-Tough, built for versatile and exciting driving fun
that could only come from Traxxas.
Class-Leading Brushless Power
The Traxxas Velineon Brushless Power System brings the Rally to life with
outrageous electric power that doesn't know limitations and boundaries. Pour in
the voltage and out comes the speed in tidal waves of force harnessed by
precision throttle control. The sheer brutal power combined with the Rally's
four-corner grip results in tire-melting acceleration and lightning fast speed.
The Velineon 3s Brushless Power System's components work together as an
optimized package, from the patented Traxxas High-Current connector to the
custom-wound motor. The Velineon system delivers the ultimate in efficiency,
speed, and run-time with precision throttle response and refined control.
It's
brushless performance the Traxxas way: wicked fast and easy to use. Just plug it
in and it works, no special knowledge or programming skills required.
Velineon VXL-3s Electronic Speed Control
Inside its waterproof case, the Velineon VXL-3s speed control is loaded with
high-grade technology to precisely deliver maximum power to the motor. It's
engineered for today's battery technology and beyond. Two-stage low voltage
detection allows full LiPo compatibility, including powerful Traxxas
Power Cell 11.1-volt 3S LiPo
packs.
Velineon 3500 Brushless Motor
Extreme performance is standard equipment with the sensorless Velineon motor.
Ultra high-temperature Neodymium magnets, high-speed ball bearings, and a
precision balanced rotor deliver power and long life with near zero maintenance.
Since there are no brushes or commutator to wear out, you always get the same
blistering acceleration and ballistic top speed run after run.
The World's Most Advanced Ready-To-Race Radio
System
The
Traxxas Rally is equipped with the world's most advanced Ready-To-Race radio
system. The all-new Traxxas TQi
arrives with a full complement of tuning features and offers the unbeatable
convenience of "no channels, no crystals" 2.4GHz technology—but that's just the
beginning. Automatic model recognition instantly recalls your settings for up to
30 Traxxas Link-enabled models. Just switch on and drive, no naming or "model
memory" settings required. Power up the transmitter and the model you want to
drive, and the settings for that model are dialed in immediately! The new TQi
2.4GHz transmitter is fully adjustable: steering and throttle end points can be
set precisely, and the Multi-Function knob can be programmed to control Steering
Sensitivity (Expo), Throttle Sensitivity (Expo), Steering Percentage (Dual
Rate), Braking Percentage (Dual Rate), or Throttle Trim. TQi's ergonomic case
design provides all-day driving comfort, and the unique internal antenna
contributes to its sleek, modern look.
TQi
Docking Base Compatible
The TQi's most important new feature may already be in your pocket. The TQi can
be equipped with an optional Docking
Base (#6510) that turns your iPhone or
iPod touch (sold
separately) into a powerful tuning tool for your Traxxas model. The full-color
display combines with the free Traxxas
Link App (on the App Store) to
deliver an intuitive, high-definition, full-color graphical user interface that
unlocks the mysteries of optimizing your radio system for ultimate vehicle
control. Traxxas Link also opens the door to telemetry capability when you add
optional sensors to your model. Click on one of the following links to learn
more about the ground-breaking TQi
radio system, TQi Docking Base, and
the Traxxas Link Application.
All-New Low-CG Chassis
The
innovation designed into the Rally begins with an all-new low center of gravity
(CG) chassis that's unlike anything you've seen before. The battery and
electronics are held as low as possible to position weight low in the chassis.
Extreme Brushless Power and 4WD require a chassis that won't flex under load for
arrow-straight, hard-charging acceleration. To offer the required rigidity,
smoothly integrated ribs form a triangulated structure that's optimized for the
loads imparted by the suspension and powertrain. Underneath, the chassis is
ultra-smooth to reduce drag and prevent snags driving through real-world
conditions, and the Rally incorporates state-of-the-art concepts to maximize
speed and fun on or off the race track. The low-CG design dramatically increases
corner speed and stability on tarmac, gravel, and extreme off-road conditions.
On the track, the low center of gravity allows the Rally to put the Velineon
power down with superior traction, resulting in hard launches and fast lap
times. The Rally feels planted and secure at speed delivering realistic Rally
handling and performance.
Ultra
Efficient Shaft-Driven 4WD
The Rally uses just three gear meshes to drive all four wheels, eliminating the
need for a multi-gear transmission. The highly efficient drivetrain spins
effortlessly on rubber-sealed ball bearings, and is integrated seamlessly into
the Rally's unique chassis for optimum performance and easy maintenance. The
center driveshaft is formed from extruded aluminum and extremely lightweight,
contributing to the Rally's right-now acceleration. There are no dogbones to
wear, no drive cups to wobble. The extrusion process creates internal splines
that fit directly and securely onto the input shafts of the front and rear drive
assemblies. The shaft runs perfectly straight and true and superior rigidity and
durability. Traxxas engineers highlighted this important innovation with vivid
blue anodizing and a laser-etched Traxxas logo.
Modular Simplicity
Old designs made servicing of 4-wheel drive vehicles cumbersome and
time-consuming. Traxxas has a better way. The Rally's modular design allows the
entire front section to be removed with just five screws, and the rear assembly
with just four screws. In less than a minute using a power screwdriver, you have
full access for easy service and adjustment.
Waterproof Electronics Extend Your Driving Fun
Only
Traxxas lets you experience brushless-powered 4WD Rally excitement year-round,
no matter what mother nature has to offer. Water, mud, and snow don't slow down
full-size rally racers or the Traxxas Rally; its electronic speed control,
receiver box, and high-torque digital steering servo are all waterproof for
no-worry fun in wet conditions that add excitement to rally racing in any scale.
Drive the Rally where you want, when you want—the only limit is your
imagination.
Authentic Rally Style
The Rally's authentically-styled body is fully decorated with bold logos and
graphics, ready to hit the race course right out of the box. The Rally's all-new
tires are fully licensed and duplicate BFGoodrich's Gravel tread
to accurately represent the full-size tire for the ultimate in realistic
performance and control. New wheels complete the look with a 12-Spoke Rally
design color-matched to the body. The new wheels are fully compatible with
factory Traxxas and aftermarket tires, and feature 12mm hexes and the same
offset as Slash 4X4 wheels for multi-car versatility.
100% Fully Assembled and Ready-To-Race
The 1/10 Rally rolls out of the box fully-assembled and Ready-To-Race with
included Power Cell NiMh battery and charger, fully installed and adjusted TQi
2.4GHz radio system, Velineon brushless power system, painted and decaled body,
pre-glued tires, and detailed instructions. Traxxas backs the Rally and all of
our products with top-notch support that is second to none. A staff of skilled
representatives is on-hand to answer your questions via phone, website, or
e-mail. Unmatched parts support allows Rally to be serviced with parts and
support from thousands of hobby dealers worldwide. Your investment is also
protected by the Traxxas Lifetime Electronics Warranty. Traxxas goes the extra
mile to ensure that your R/C experience is easy and fun (and fast!). Follow the
details link above to go in depth on all the Rally performance benefits and also
be sure to check out the videos page to see Rally in action for yourself.
MODEL 7407: Fully assembled, Ready-To-Race with
TQi 2.4GHz radio system, Velineon Brushless
Power System, Power Cell battery, and ProGraphix painted body.
Details
Innovative New Chassis
The innovation designed into the Rally begins with an all-new low-CG chassis
that's not like anything you've seen before. Extreme Brushless Power and 4WD
requires a chassis that won't flex under load for arrow-straight, hard-charging
acceleration. To offer the required rigidity, smoothly integrated ribs form a
triangulated structure that's optimized for the loads imparted by the suspension
and powertrain. Underneath, the chassis is ultra-smooth to reduce drag and
prevent snags driving through brush.
Low
Center of Gravity
Rally introduces a new low center of gravity chassis for the ultimate handling
experience. The race-tuned ride height paired with the high-performance Ultra
Shocks deliver off-road versatility that allows you to tackle rough terrain and
big obstacles. On the track, the advantage of a low center of gravity (cg) is
noticed instantly by the lower lap times. Rally feels planted and secure at
speed and at the same time delivers authentic rally handling and realism that
makes rally racing such incredible fun.
Perfect
Weight Bias
Each component on the chassis was carefully positioned for optimal weight
distribution and space utilization. The result is perfect weight bias for
neutral handling precision. The bulk of the mass is distributed down the
centerline of the chassis for smooth, stable cornering.
Modular
Simplicity
Old designs made servicing of 4-wheel drive vehicles cumbersome and
time-consuming. Traxxas has a better way. Modular design allows the entire front
section to be removed with just 5-screws, and the rear assembly with just
4-screws. In less than a minute using a power screwdriver you have full access
for easy service and adjustment. Click the video tab above to learn more about
this feature!
The World's Most Advanced Ready-To-Race Radio
System
Total
Control. The Rally features
the world's most advanced Ready-To-Race radio
system for precise, long-range control. Comfortable, powerful, and reliable, the
all-new TraxxasTQi
radio system matches a full complement of tuning features with a high-output
2.4GHz signal, and proven Traxxas reliability for rock-solid performance. It's
so advanced, it doesn't even have an external antenna. However, the most
important new feature may already be in your pocket. The TQi can be equipped
with an optional Docking Base (#6510) that turns your iPhone or
iPod touch into
a powerful tuning tool for your Traxxas model. The full-color display combines
with the Traxxas Link App to
deliver an intuitive, high-definition, full-color graphical user interface that
unlocks the mysteries of optimizing your radio system for ultimate vehicle
control.
5-channel
Micro Receiver with Fail-Safe Security
The TQi 2.4GHz micro receiver fits easily into any vehicle, and features dual
channel-1 outputs for easy installation in vehicles with dual steering servos—no
Y-harness necessary! The integrated LINK button makes it fast and easy to bind
the receiver, and the two-color LED indicates power-on and bind status for
fool-proof control and convenience. Traxxas Link Model Memory allows the
receiver to recognize up to thirty TQi 2.4GHz Traxxas Link enabled
transmitters—just switch on and drive. In the event of signal loss due to an
accidental switch-off or depleted batteries, the receiver will automatically
return the throttle to neutral and hold the last commanded steering position.
The Fail Safe programming is built-in and does not need to be set or activated.
Three telemetry ports are incorporated in the 5-channel receiver to allow
real-time data to be transmitted from your Traxxas model to the TQi transmitter.
Included
7-Cell Battery Pack
Rally includes a genuine Power Cell Battery Pack to make sure you experience all
the performance that's been engineered into your Traxxas model. Power Cell packs
are optimized for free-flowing power and maximum punch with premium quality,
low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty
welded tabs; and Traxxas' high-output, gold plated, high-current connectors.
Precision assembly with attractive, individually wrapped cells and clear
overwrap complete the Traxxas Power Cell package, and seven cells give Rally 8.4
volts of motivation for maximum speed. For even greater performance, speed, and
run time, a full line of optional Traxxas Power Cell NiMh and LiPo batteries are
available. How fast can you go?
Versatile
Battery Compartment
The Rally adapts to multiple battery configurations to accept today's technology
and tomorrow's innovations. 6 or 7-cell NiMH battery packs and a variety of LiPo
battery configurations can be installed easly.
Integrated
Personal Transponder Mount
The integrated personal transponder mount makes it easy to install your
transponder and move it to the other Traxxas vehicles in your fleet. No tape
required, two screws is all it takes. Traxxas makes racing easy!
Waterproof Receiver Box
The Rally's receiver is fully enclosed for protection from the elements when
your rally race rages through rain, mud, or snow. The antenna and servo wires
route neatly through a special watertight seal, and a custom blue O-ring seals
the box to protect the receiver from water. The enclosure can be opened and
closed without losing the sealing properties of the box, allowing the receiver
to be removed for service, or for aftermarket receivers to be installed. Patent
pending.
-
Velineon VXL-3s
ESC
The Velineon VXL-3s speed control is loaded with high-grade technology to
precisely deliver maximum power to the motor. It's engineered for today's
battery technology and beyond. Two-stage low voltage detection allows full
LiPo compatibility, including powerful 11.1-volt 3S packs!
- Innovative waterproof design
- Three Programmable Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patent pending)
- Integrated on/off switch
- Traxxas EZ-Set one-button
setup
- Large heat sink
- High-efficiency MOSFET transistors
- Auto-detects brushed, brushless, and sensored brushless motors
- Built-in two-stage low-voltage detection for LiPo batteries
- NiCad and NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
Velineon 3500
Brushless Motor
Extreme performance is standard equipment with the sensorless Velineon motor.
Ultra high-temperature Neodymium magnets, high-speed ball bearings, and a
precision balanced rotor deliver power and long life with near zero maintenance.
Since there are no brushes or commutator to wear out, you always get the same
blistering acceleration and ballistic top speed run after run.
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Consistent, high-power output, run after run
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- Accessible solder tabs
- Protective end cap
- 10-Turn, 3500kV
- Rebuildable
- Hex hardware
- Brilliant blue-anodizing finish
- Silicon steel laminations
- Delivers more power than comparable brushed motors
Traxxas
High-Current Connector
The Velineon Power System doesn't waste power (or speed) on flimsy
connectors. The patented Traxxas High-Current connector features gold-plated
connectors in a virtually zero loss design that effortlessly funnels your
battery's total power to the electronics to keep things running cool and at full
capacity.
Maxx
Cable 12-Gauge Wire
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a
series of giant pipes, flowing energy in and out of the electronic speed
control. The Traxxas Connector combined with Maxx cable is a better engineered
solution for extracting all the power your battery has to give.
Hex
Hardware
Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra
strength, and easy maintenance and repair. The black-oxide rust-resistant finish
provides a high tech look and feel.
Rubber-Sealed
Ball Bearings
Precision 5x11mm rubber-sealed bearings offer the ultimate in super low-friction
performance and maximum protection in dirty environments. They are used in all
exposed locations on the car and are virtually maintenance free.
Oil-Filled
Ultra Shocks
High-speed on- and off-road action requires rugged, responsive shocks that can
take abuse. Traxxas Ultra Shocks are proven tough as stock equipment for Traxxas
Maxx trucks. The high-volume body yields large oil capacity, and a silicone
bladder separates oil from air within the shock for consistent damping action,
even during all-day off-road sessions. Dual X-ring seals give super-smooth
performance without weeping or leaking, and Ultra Shocks are fully tunable with
a wide range of oils, springs, and pistons.
Digital
High-Torque Waterproof Steering Servo
Rally racing requires a powerful steering servo for responsive performance. The
Traxxas 2075 digital high-torque, ball bearing steering servo comes standard for
precision control, quick response, and unmatched torque—all in a waterproof
case. Over 125 oz-in torque commands the Rally with authority, and the servo's
0.16-second speed turns your inputs into instant response at the wheels.
Extruded
Aluminum Driveshaft
The Rally's center driveshaft is formed from extruded aluminum. There are no
dogbones to wear, no drive cups to wobble. The extrusion process allows the
shaft to be hollow and lightweight with internal splines that fit directly and
securely onto the input shafts of the front and rear drive assemblies. The shaft
runs perfectly straight and true and offers superior durability. Traxxas
engineers highlighted this important innovation with vivid blue anodizing and a
laser-etched Traxxas logo.
Single-Screw
Motor Access
Inspired by the innovative E-Revo, Rally features a unique mount that holds the
Velineon 3500 motor securely yet releases instantly with just one screw.
Gear-mesh adjustments are fast and easy and the motor can be removed in just
seconds.
Revo-Spec Differentials
Race-proven in the 7-time National Champion Revo, Rally's differentials
represent the state of the art in power handling and efficiency. Precision
silicone gaskets and X-ring seals allow the diffs to be tuned for specific
running conditions by varying the viscosity of the fluid inside them.
Differential access for tuning is quick and easy. Just remove the front or rear
cover and the entire differential slides right out. Rally let's you focus on
having fun driving at the racetrack instead of being chained to the workbench
scrambling through complex assemblies.
Heavy-Duty
Driveshafts
Traxxas' telescoping, universal-joint driveshafts have evolved for even greater
strength and articulation and are standard equiopment on the Rally. The U-joint
driveshafts allow for maximum suspension movement and drivetrain efficiency,
resulting in longer travel, tighter turning, and full power delivery. Extra
material and fine-tuned design greatly increase torque handling. The shafts can
also be used to upgrade the Slash 2WD and other Traxxas models!
Revo-Spec
Torque-Control Slipper Clutch
Another Traxxas exclusive, the Rally's patented slipper clutch design uses
special semi-metallic friction material and finned aluminum alloy pressure
plates to dissipate heat and provide consistent traction control. The slipper is
easily adjusted without disassembly or removal, and the unique 3-pad design is
proven rugged in Traxxas' most powerful electric and nitro vehicles. It's the
perfect compliment to Velineon brushless power and 4WD, offering the ultimate in
traction control.
Heavy-Duty
32-Pitch Gears
Extreme brushless horsepower is never an afterthought at Traxxas--we engineer
every component with the demands of brushless power in mind. The Rally driveline
is built to handle the full-power thrust of the Traxxas Velineon system and
accommodate future power upgrades down the road. The spur gear's rugged 0.8
module/32-pitch teeth assure total reliability no matter how much power you pour
on.
Mamba
Monster Compatible
The Rally's low-CG chassis allows the massive Mamba Monster power system—which
normally motivates trucks twice the weight of the Rally—to drop right in with no
parts modification required. Overkill? Perhaps, but we can't resist going
80+mph. We don't think you'll resist either, so the drivetrain is built to
handle the horsepower and speed.
Long-Travel
Suspension
Unlike road-car rally conversions, the Traxxas Rally has huge amounts
ultra-plush suspension travel that swallows up jumps and delivers incredible
off-road control. All that travel gives Rally a truly authentic look and
handling response that accurately simulates international rally racing, whether
you're in the dirt or on the road. The fully-optimized front axle carrier is a
result of computer modeling that allowed engineers to design for maximum
articulation without binding or interference. Tight steering response is always
there, even at the extreme ranges of the suspension travel. Double-shear tie
rods and camber links simply can't pop off, so you always stay in control.
Robust construction wards off crash damage, and oversized 10x15mm inboard
bearings and 5x11mm outboard bearings are incredibly durable and smooth.
Optimum-Geometry Steering with Integrated Servo Saver
No part of Rally was overlooked in the quest for durability, precision, and
performance. The dual-bellcrank design pivots on rubber-sealed ball bearings for
smooth action in the harshest conditions, and an integrated cam-type servo saver
protects the servo gears from crash impacts without sacrificing steering
precision.
Heavy-Duty
4mm Turnbuckles
Rally's turnbuckles have broad flats that make it easy to set toe-in and camber.
The tough steel construction is ultra durable and the captured rod ends won't
pop apart during rigorous off-road pounding.
Progressive
Springs
Progressive rate springs are lighter through the initial range of travel to
maintain traction and composure over the usual track ruts and bumps. Hit the big
jumps and the springs tighten up to prevent bottoming the chassis at the extreme
ranges of the suspension travel.
Officially Licensed BFGoodrich tires
Traxxas' attention to detail for Rally includes authentic, fully-licensed tire
designs that replicate the actual racing rubber used on dirt or gravel
rally circuits. The BFGoodrich Rally
Gravel tires offer superior traction on pavement, dirt, gravel, and more. The
tire's unique directional tread pattern and sidewall design is captured in
high-grip rubber, right down to the raised lettering on the sidewall.
Rally
12-Spoke Wheels
Equal parts style and strength, the new rally wheels feature a new 12-Spoke
Rally Replica design color matched to the body style you choose. The wheels
are molded in color (not painted) for scratch-proof good looks. Fully compatible
with factory Traxxas and aftermarket tires, the new wheels also feature 12mm
hexes and the same offset as Slash 4X4 wheels.
ProGraphix Bodies
Bold graphics, aggressive lines, authentic styling, and realistic proportions
give the Rally a stunning look that is distinctly Traxxas. The body's crisp
edges, flowing curves, and precise detailing perfectly suit the horsepower that
lurks beneath. All you need to do is admire it; all the painting, decaling, and
mounting is done for you. Traxxas is always Ready-To-Rac!
MODEL 7407: Fully assembled, Ready-To-Race with TQi 2.4GHz radio
system,
Velineon Brushless Power System, Power Cell NiMH battery, and ProGraphix
painted body.
Features
- Powered by the Velineon Brushless
Power System
- Rigid low center of gravity chassis design
- Full-time 4WD, 40+mph out-of-the-box!
- Rally reaches speeds in excess of 60mph with 3-cell LiPo (sold
separately)!
- Traxxas High-Current Connector allows high-capacity battery packs to
deliver maximum voltage to the Velineon Brushless Power System
- Exclusive waterproof electronics extend brushless power and performance
to water, mud, and snow
- Maxx Cable
12-gauge wire
- Velineon VXL-3s Waterproof Electronic Speed Control
- LiPo, NiCad, and NiMH compatible with two-stage low-voltage
detection
- Auto-detects brushed, sensorless and sensored brushless motors
- Sport Mode – Forward / Brake / Reverse
- Race Mode – Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patent pending)
- Velineon 3500 Brushless Motor
- Consistent, high-power output, run after run
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- TQi 2.4GHz transmitter
- Automatically stores and loads settings for up to 30 Traxxas
Link-enabled models—just switch on and drive, "model selection" is not
required
- Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- TQi 2.4GHz 5-channel micro receiver (#6518) with fail-safe security
and integrated telemetry ports
- Compatible with optional TQi Docking Base (#6510)
for full Traxxas Link
Appcapability with Apple iPhone or iPod touch (sold separately)
- Durable steel Jato-Style
turnbuckles and captured rod ends
- Single-screw motor access makes gear-mesh adjustments fast and easy and
the motor can be removed in just seconds
- Modular simplicity, fiber-composite monocoque chassis
- Speed control and receiver are securely fastened to chassis
- Integrated personal transponder mount
- Versatile battery compartment easily adapts to multiple styles of
batteries; 6 or 7-cell NiMh battery packs and various configurations of
Lithium Polymer packs are no problem for Rally
- Digital high-torque Traxxas #2075 ball bearing waterproof steering
servo
- Waterproof, o-ring sealed receiver box
- Sealed, silicone-filled differentials
- Revo-Spec
Torque-Control slipper clutch system
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder coated shock springs feature a responsive spring rate
- Telescoping universal-joint driveshafts
- Rubber-sealed ball bearings
- Officially-licensed BFGoodrich Rally
Gravel race tires
- Scale all-terrain front and rear tires offer superior on- and off-road
traction
- Pre-glued all-terrain tires with high-performance foam inserts
- ProGraphix painted
bodies are available in red, blue, green, and orange
- Full line of genuine Traxxas accessories available
- Rally is backed by unparalleled Traxxas support and parts availability
MODEL 7407: Fully assembled, Ready-To-Race with
TQi 2.4GHz radio system, Velineon Brushless
Power System, and ProGraphix painted body.
Specification
Rally (#7407) SPECS
Length: |
|
21.7 Inches (552mm) |
Front Track: |
|
11.7 Inches (297mm) |
Rear Track: |
|
11.7 Inches (297mm) |
Center Ground
Clearance: |
|
0.82 Inches (21mm) |
Weight: |
|
98.0oz (2.78kg) |
Height (overall): |
|
8.1 Inches (206mm) |
Wheelbase: |
|
12.8 Inches (324mm) |
Shock Length: |
|
Long (front), XXLong (rear) |
Tires: |
|
Officially-Licensed BFGoodrich Rally
Gravel
2.2" Pre-Glued with Foam Inserts |
Tire Diameter: |
|
4.02 Inches (102mm) (front and rear) |
Wheels (front/rear): |
|
2.2" 12-Spoke Rally Replica (White, Green, or Orange) |
Wheel Diameter: |
|
2.2 Inches (56mm) Outer
3.0 Inches (76mm) Inner |
Speed Control Type: |
|
VXL-3s Electronic Speed Control (waterproof) |
Motor (electric): |
|
Velineon 3500
Brushless |
Overall Drive Ratio: |
|
11.82 (stock,
out-of-box) |
Differential Type: |
|
Hardened Steel Bevel, Sealed, Limited Slip |
Gear Pitch: |
|
32 |
Chassis Structure/Material: |
|
Molded Tub / Nylon Composite |
Drive System: |
|
Shaft-Driven, Direct Drive 4WD |
Steering: |
|
Dual-Bellcrank with Integrated Servo Saver |
Radio System: |
|
TQi 2.4GHz 2-Channel |
Body: |
|
Traxxas Rally |
Top Speed: |
|
60+mph* |
Skill Level: |
|
1 |
Included Accessories: |
|
7-Cell 3000mAh NiMH (8.4 volts) Traxxas Power Cell Battery Pack and
Charger, Precision Tool Set |
Required Items: |
|
4 "AA" Batteries (for transmitter) |
RALLY SPEED & SKILL LEVEL CHART
Speed: |
35+mph |
40+mph |
40+mph |
45+mph |
60+mph |
Pinion/Spur: |
13/54* |
19/54** |
19/54** |
13/54* |
19/54** |
Battery: |
7-Cell NiMH |
7-Cell NiMH |
2S LiPo |
3S LiPo |
3S LiPo |
Nominal Voltage: |
8.4V |
8.4V |
7.4V |
11.1V |
11.1V |
mAh: |
5000+ mAh |
4000+ mAh |
4000+ mAh |
5000+ mAh |
5000+ mAh |
Skill Level: |
1 |
2 |
4 |
4 |
5 |
VXL-3s ESC SPECIFICATIONS
Input Voltage: |
|
NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells (7.4 to 11.1 Volts DC) |
Case Size: |
|
39mmW x 55mmD x 33mmH |
Weight: |
|
90 grams |
Motor Limit (Brushed/Brushless): |
|
No motor limit |
On Resistance Forward: |
|
0.00075 Ohms |
On Resistance Reverse: |
|
0.00075 Ohms |
Peak Current - Forward: |
|
320A |
Peak Current - Reverse: |
|
320A |
Braking Current: |
|
320A |
Continuous Current: |
|
200A |
BEC Voltage: |
|
6.0 V |
BEC Current: |
|
2.5A (with 6-cell NiMH) |
Power Wire: |
|
12-Gauge Maxx Cable |
Input Harness Wire: |
|
26 Gauge / 100mm |
Transistor Type: |
|
MOSFET |
Low Voltage Detection: |
|
2-Stage indicators, switchable (on or off) |
Thermal Protection: |
|
2-Stage thermal shutdown |
Profile selection: |
|
Sport Mode:
100% FWD, 100% BRAKES, 100% REV
Race Mode:
100% FWD, 100% BRAKES, NO REV
Training Mode:
50% FWD, 100% BRAKES, 50% REV |
Single-Button Setup: |
|
Yes, Traxxas EZ-Set |
Battery Input Connector : |
|
Traxxas High-Current Connector |
Motor Types (Autodetect): |
|
Brushed, brushless, sensored brushless |
Ports: |
|
RX Input, motor sensor, auxiliary fan |
MODEL 7407: Fully assembled, Ready-To-Race with
TQi 2.4GHz radio system, Velineon Brushless
Power System, and ProGraphix painted body.
Click here for more Information
Manual
Instructions
Parts List
Watch A Video of This
Model